MAX-FLO VALVE – DIAPHRAGM TYPE
The latest in the Hansen range of excellent float valves for use in troughs or tanks, the “Max-Flo” is an extremely efficient valve with exceptional flow rates. 300 L/min at 50 kPa out to an amazing 1,200 L/min at 1,100 kPa of inlet pressure. Described as a slow closing valve, the Max-Flo reduces water hammer in pipework, has a 100mm blue UV stable float, has a glass reinforced nylon body, adjustable extension arm and 600mm of nylon cord so that the valve can be mounted below water level if required. Comes with a 25mm and 20mm male BSP inlet nipple. Operating range is a minimum of 20 kPa to a maximum of 1,200 kPa.
Operating pressure 20kPa – 1200kPa, providing high flow (570 lpm @ 200kPa). Valve (1” BSPF Inlet x 11⁄4” BSPM Outlet – threaded outlet allows for connection to a diffuser tube) supplied complete with Adjustable Extension Arm, 4” Blue Ball Float, 600mm Cord and 3⁄4” BSPM & 1” BSPM self-sealing adaptors with O-rings. 1⁄2” and 11⁄4” BSPM adaptors also available as spare parts.
The Max-Flo Valve has a “SELF CLEANING PILOT” which allows its use in dirty or clean water and the variable open/close action reduces valve “chatter or bounce” and water hammer under high
Features and Benefits:
- High Performance, Cost Effective Trough/Tank Valve (29 psi, 570 l/min)
- Suitable for Side, Bottom and Top entry
- Strong Compact Design
- Delivers high volumes of water quickly with unrestricted full flow
- Patent pending* “Self Cleaning Pilot” for use in clean/dirty water
- Low operating pressure required reducing pumping costs and increasing flow
- Manufactured from strong, non corrosive UV stabilised materials
- Mini body design to enable easy installation
- Available in Female and Male BSPT, NPT and ACME thread configurations
- Suitable for High/Low Pressure operations – from 0.2 Bar to 12 Bar
- Variable open and close action preventing valve bounce and water hammer
