Flexibore Hose

Flexibore Hoses

Flexibore 100 series has been designed to reduce the time of installing bore pumps pumping at shallower depths down to 100m, while maintaining the advantages of a exible riser. Flexibore 100 series lends itself to hand and basic installation in rural and domestic applications as well as remote areas with dif cult access.

Flexibore is a exible riser used for ground water pumping

Flexibore 100 will suit many borehole applications and is compatible with most submersible pumps. The diameters are 32mm & 50mm ID for depths of up to 100m.
For deeper applications refer to Flexibore 200.

General Application

Flexibore has been speci cally designed to replace rigid riser pipes such as Poly & PVC which are subject to encrustations resulting in reduced ow rates. Poly pipe can be dif cult to remove when the pump requires servicing. There is no safety cable required when using Flexibore due to its high tensile strength.

Typical Applications

These include mine de-watering, domestic and municipal water supply, test pumping, rural and industrial bore-water retrieval and similar ground water projects.

Easy Installation

Flexibore is attached to the pump with the patented couplings. The pump, with hose and cables attached, is lowered into the bore using either a simple rolling wheel or a crane. With its continuous length, the hose can be installed with less time and labour than rigid systems, this includes poly pipe. The same advantages apply to pump retrieval.

Showing all 3 results

Showing all 3 results