GALCON DC-S SERIES BATTERY OPERATED CONTROL – MISTING CONTROL
Galcon DCS series battery operated controller designed for use in watering systems when
running wires is not an option. Galcon DCS series are durable enough to be installed below ground in a valve box providing reliable trouble free control.
FEATURES
- Weekly or cyclical programming
- Up to 4 cycle starts per day
- Station water time 1 second to 11 hrs 59 seconds
- Daily loop cycle watering
- Watering frequency once every minute or once every 30 days in cyclical program
- Waterproof rating IP68
- Rain off sensor option (rain sensor optional)
- Water Budget adjustment -90% to +90% in 10% increments
- Manual operation
- Low battery indication on display
- Control module mounts on valve or
inside of valve box with mounting bracket supplied
- DC1S Solenoid connects to industry standard valves HR, Orbit, Toro & Irritrol – check others
- DC6S connects to Galcon DCV solenoids
- 24 hour or 12 hour time format
OPERATION FEATURES CONTROL MODULE
- Up to 4 cycle starts per day
- Station water time 1 second to 11 hrs 59 seconds
- Selectable by day Monday – Sunday
- Watering frequency once every minute or once every 30 days in cyclical program
- Daily loop cycle watering
- Rain delay from 0 – 30 days
- Water budgeting -90% to +90% in 10% increments
- Mounts directly over solenoid
- 2 x 9 volt alkaline batteries (optional extra)
- Operating pressure 105 – 800 kPa
- A maintained filter is recommended upstream of the solenoid valve
- Remove batteries if irrigation suspended for more than 30 days
- Maximum valve distance from DCS series is 5 meters
MODELS
Part Number
1 station control module with solenoid coil DC1S 6 station control module, connects to Galcon DCV series solenoid valves DC6S
