Marani has one of the largest specific ranges of poly reel irrigators available in all markets worldwide ranging from a 40mm to a 160mm machine.
Every machine is complete with manuals, instruction stickers, spare parts lists and performance sheets to make the end user run the machine very easily by themselves.
Features: There are many features that allow our Marani Hard Hose Irrigators to stand out from the competitors, here are just a few:
- Fully Galvanized
- Corrosion resistance
- Extra durability
Fourth Generation Choke Flow
- Lower pressure loss over turbine
- More economical to run
- Gives a wider speed control range Direct coupled to gearbox
PE Hose
- Manufactured to resist heavy drags
- Will work at high pressures
Tachometer
- Retraction speed can be instantly read out
Drum Supports
- Drums are supported by large water proof bearings giving an increase in drum life
Hose Guide System – Scroll Bar
- Guarantees a perfect layering of the PE hose Reduces hose wear to a minimum
Gearbox
- Single, 3, 4 & 6 Speed gearboxes
- Ease of speed changing
Turbine system for GT Models
Marani Fourth Generation Turbine and Gearbox used on GT Machines are proven for Low Pressure applications and the Gearbox has been used for Both Gun Trolley Boom Irrigators for over 10 years.
The Choked-Flow Turbine with built in bypass is flanged directly to the Gearbox. This also eliminates a Transmission belt and external by pass. This makes the system reliable from a performance point of view Turbine is made with special Aluminium and machined using CNC marching Centre.
Turbine system for GTS and ITS models
The Marani GTS and ITS Models use the most efficient turbine on the market and when direct coupled with the new Gearbox they are proven to require less water and pressure, allowing more to flow through to your gun.
No back-stop is needed. When the Gear Leaver is in the middle position the Drum is locked for Transport
With the Gear shift in correct position the reel will not turn. This makes it Impossible to break gearbox by winding up hose with PTO drive.
You can also easily see what speed you are in with the top gear change: 1-2-3-4.
- With the Lower change when in the Left position: hose is ready to pull-out & PTO wind-up.
- Centre position: drum lock down for transport
- Right position: working position
- If a Foreign Object jams up the impeller just reverse the impeller by turning the outlet shaft next to turbine.
For more information on this product please click here
