![](https://irrigationdirect.com.au/wp-content/uploads/2017/08/irripod-step-5.jpg)
What is an Irripod effluent system?
- Irripod Effluent Systems are flexible cost effective Pod Pipeline Systems for Effluent Distribution.
- Designed to operate at low pressure. The Irripod Effluent System distributes liquid effluent on a slow absorption rate over a 12-24 hour period. This allows for effective absorption into the soil whilst eliminating pooling and run off.
- The Irripod Effluent System is a component system that is simple to install and manage.
- The Irripod Effluent System utilizes Protective Pod Skid covers over sprinklers that are attached to a 45mm Effluent Pipeline.
- The Irripod Effluent System can be configured to suit individual requirements depending on the application rates, the distance to be irrigated and the rotation intervals appropriate for the situation.
- Each Irripod Effluent System can be customized to suit varying paddock sizes and shapes while also accommodating existing obstructions.
- Irripod Effluent Systems are strong, lightweight and flexible.
- Easily moved by attaching the Hydrant or Pod lines to an ATV or farm vehicle.
- The Irripod Effluent System is designed to Distribute Liquid Effluent.
(solid materials separated via a Dual Pond System or Solid Separator, Not Included)
System Layout
The Irripod Effluent System has been designed to be moved easily by one person, you will require an ATV or farm vehicle to
drag the Sub Main Line and Pod Sprinkler Lines.
Your Irripod Effluent System has been provided with the Hansen™ 45mm Male Camlock Fittings for both ends of the
50 metre Sub Main Set and the 120 metre Pod Sprinkler Lines.
This allows you to attach the Sub Main Set to the Adaptor Set via a 63mm Drag Hose*, or the Pod Sprinkler Lines to the Pod
Hydrants from either end.
Step 1
A. Turn the Isolating Valve off, this is located on the 90mmÂ
Adaptor Set (Part A).
B. Turn all the Pod Sprinkler Valves off at the Pod Hydrants
(Part C).
Step 2
Remove the Hansen™ Tow System from the Male Camlock
at the opposite end of the Pod Sprinkler Line (Part D).
Step 3
A. Disconnect the Male Camlock at the Pod Hydrant end (Part C).
B. Connect the Hansen™ Tow System to the Male Camlock.
Step 4
Attach the Pod Sprinkler line to an ATV and Proceed to drag the
line across the sub main pipe in the opposite direction of the
previous location of the line.
Step 5
Connect the Pod Sprinkler Line to the Pod Hydrant and turn the
Pod Sprinkler Line to the on position.
Repeat steps 2 to 5 until all the Pod Sprinkler Lines have been
relocated.
Turn the Isolating Valve on and begin irrigating.
When the desired level of effluent has been applied to the
paddock turn the Isolating Valve off; this is located on the 90mm
Adaptor Set (Part A).