RAINDROP® 1½” ALI/BRONZE DUAL LEVEL FLOAT VALVE

Raindrop® Dual Level Float Valve has been designed to control water levels in storage tanks that are
supplied by a pressure pump or pressure unit. This valve lets the water level drop approximately 400mm
before the valve opens, the valve will then remain open until the tank is FULL.

The Raindrop® Dual Level Float Valve is manufactured from marine grade aluminium bronze and premium
quality high density polystyrene floats to ensure the float will consistently actuate the valve.

The valve inlet is 1½” BSP FI and is suitable for pressures up 700Kpa (approx 100 Psi) and will deliver
approximately 250 litres per minute at 300 Kpa (Approx 3,300 gallons per hour at 45 Psi).

IMPORTANT NOTE: The Raindrop® Dual Level Float Valve is designed for use with rural / farm water in
conjunction with a farm pump / pressure unit. This product is not recommended for commercial or industrial
use or for connecting to mains water supply. Do not exceed 250 l/ min discharge – install a gate valve before
the valve to reduce flow if needed. Only water free from debris should be allowed to pass through the valve in
order to maintain correct actuation of the valve.