![](https://irrigationdirect.com.au/wp-content/uploads/2016/05/presscontrol.jpg)
PressControllers – to suit MH pumps – Supplied with Leads
PressController use hydraulics and electronics to simultaneously detect both pressure and flow and auto manage pump operation.
Replaces a traditional pressure tank system.
- Genuine Presscontrol
- European Quality
- 240 Volt
- IP65 Protection
- Max pressure 10 bar
- Water temperature to 65deg max
- Solid plastic quality construction
- Max power 1.1kW
- Maximum current 16(8)A
- 1″ Male inlet and outlet
- Plug and Lead included
- 1.5Bar Cut-in pressure
Savings in purchasing 12 units at a time – POA
MH 3 MH 5 |
1.5 bar setting |
230V |
Presscontrol Standard |
||
MH 3 MH 5 |
2.2 bar setting |
230V |
Presscontrol Standard |
||
230V ± 10% 50-60 Hz, 8 amp, max maximum power 1.5 kW. |
|||||
Maintenance free, minimises effects of water hammer |
|||||
Stops pump in case of water shortage, protects from dry running |
|||||
Starts and stops the pump with opening and closing taps |
|||||
Maintains constant pressure. |
|||||
MH 3 MH 5 |
1.5 bar setting |
230V |
Presscontrol Time |
||
230V ± 10% 50-60 Hz, 8 amp, max maximum power 1.5 kW. |
|||||
Maintenance free, minimises effects of water hammer |
|||||
Stops pump in case of water shortage, protects from dry running |
|||||
Starts and stops the pump with opening and closing taps |
|||||
Maintains constant pressure. |
|||||
Over 6 hours will automatically make six (6) attempts to restart the pump. |
|||||
Lasts 10 secs at intervals of: 15 sec, 20 sec, 30 mins, 1 hour, 3 hours, 6 hours. |
|||||
MH 9 |
1.5 bar setting |
230V |
MasControl |
||
230V ± 10% 50-60 Hz, 30amp, max maximum power 2.2 kW. |
|||||
Maintenance free, overcome water hammer |
|||||
Stops pump in case of water shortage, protects from dry running |
|||||
Starts and stops the pump with opening and closing taps |
|||||
Maintains constant pressure. Supplied with leads. |