Description
Series 700 – Hydro-cyclone Separators 25 – 150mm (1” – 6”)
Sand Separators – Hydro Cyclones
Sand separators / hydro Cyclones are designed and built on the principle of free flow where water flows freely on a spiral path along the length of the separators cylinder. As a result of the centrifugal force separates the heavier solids from the water and adheres to the filter’s walls. The solids gravitate downwards to be collected in an underflow chamber, while the clean water rises to emerge from the top end of the separator.
ACTUAL COLOUR MAY VARY
Feature:
Inlet/outlet axis at 90 degrees.
Electrostatic oven cured with an epoxy-polyester combination at 150 micron thickness.
Maximum working pressure up to 8 bar (116 psi). Efficiency 98% removal at 80 micron.
Always install a check filter after a separator / hydrocyclone.