SB 350 – Rainspan Soft Hose Boom Irrigators

The Rainspan Boom Irrigator Range has evolved into the most reliable, strongest, efficient and user friendly machine, whilst boasting the largest range of boom irrigator’s on the Market.

Features:

There are many features that allow our Booms to stand out from the competitors, here are just a few:

 On Board Hose Reel Perma-coupled hose makes it easy to lay out hose and cable in the one operation.
 Gearbox for smooth safe operation specifically designed for Irrigator and is the most efficient in the industry
New Generation Turbines that are the best in the industry.
 Reliable High volume Purge Pump.
 Boom lengths from 28m (38m wetted width) to 99m (119m wetted width).
 Runs up to 600m.
 Towers: 2.2m to 3.5m.
 Auto stop.

Options:

Options available for the Soft Hose Boom range (please note that each model has unique options, please refer to the individual models within the pricelist):

 Speed controller computer. Controls speed through run
 Electronic Speed counter. Gives an accurate travel speed of Irrigator
 In Line Filter. Stops any large material that won’t pass through the sprinklers
 Remote Slew from Irrigator. 1000 & 2000 slews boom from Irrigator
 Remote Slew from tractor. 350 & 550 slews boom from Tractor
 Water Supply Shutdown. Stops water flow to boom
 Pressure Sustaining Valve. Maintains pre set pressure to Irrigator
 Flow Control Valve. Maintains pre set flow to Irrigator
 Auto Boom Flush. First flush of boom
 Tower Extension. For higher crops
 Sprinkler Upgrades. Nutators, Spinners, Trash busters, I-Wob sprinklers available  End Guns. For extra width or uneven fields and corners.
 Flexible Sprinkler Drops. To lower sprinklers.
 Turf Tyre Upgrade. Wider and smoother for no tracks.
 Brake kit.

Details on the field layout with a Rainspan Soft Hose Boom Irrigator

 Field layout for the irrigator will depend on boom width and field dimensions as shown by the example given below;
 Lanes are recommended to be kept straight level grassed mowed and free from trash;
 Width of run is at least 1m wider than machine width (see specifications);
 Hydrants are located halfway and to the side of each run (Take half the width of the machine shown in specifications for model and add 1.5m);
 Each dealer will determine how much over laps is needed to suit the crop requirements, field arrangement and wind conditions in their particular area. A standard 2m overlap is recommended.

When asking irrigation dealers why they choose Rainspan Low Pressure Boom Irrigators, ‘Superior quality of construction, simplicity of design and optimum efficiency’ are standard replies.

SB350 Base Irrigator

Radial Flow Turbine Drive
 3 Speed Gearbox
 2.2m Tower
 7mmØx420mWireRope
 4” Galvanized Hose Reel
 Purge Pump
 PTO Shaft
 10.5 x 16.5” front & rear tyres
 3 Wheel Chassis
 Flow range between 7.5 – 15 LPS
*Does not include Hose / Boom

SB 350 – NO HOSE REEL

Radial Flow Turbine Drive
 3 Speed Gearbox
 2.2m Tower
 7mmØx420mWireRope
 10.5 x 16.5” front & rear tyres  3 Wheel Chassis
 Flow range between 7.5 – 15 LPS *Does not include Hose / Boom

BOOM (H/D GALVANIZED)

Includes Nelson R3000 Rotating Sprinklers on every (2nd)* Second outlet, or at ** every outlet to accommodate higher flow rates

 Each R3000 sprinkler includes a (galv) gooseneck and 300mm Dropper

Boom Options:

Boom width 28 , No of sprinklers – 10*, flow rates (7,860 gph/9.9 lps max flow)

Boom width 41 , No of sprinklers -12* , flow rates (9825 gph/12.4 lps max flow)

Boom width 48 , No of sprinklers -14* , flow rates (11,790 gph/14.9 lps max flow)

* minimum sprinkler outlets are set at 4.3m centres, (ie.every2ndoutlet)

** maximum sprinkler outlets are set at 2.15m centres, (ie. every outlet)

Options

In-line Filter
High Pressure Shutdown Valve

Computer Speed Controller (Basic)

2x end guns

HYD Slew

Brake Kit

for more information on this item please click here

0488 917 285

[email protected]