You don’t know the cause
You need to go through the process of elimination to determine the cause
Are your pipes bursting from over pressure?
This problem can be common with positive displacement pumps such as helical rotor & Piston pumps
If either of these pumping systems rely on a pressure switch to stop them possible damage to the pipeline or pump can occur if the switch fails to stop the pump
Some types of water may have Iron or calcium build up which will stop the switch from working
If it is a pressure problem we have the answer
A relatively cheap fix to the problem is to fit a pressure relief valve to the pump discharge and adjust the relief valve to open just above the cut out pressure
There are many types and sizes so the correct valve must be installed to suit the pressure & flow rate
This is a typical example of a Pressure relief valve
Product Code   SRV ……..Size
http://localhost/irrinew/product/regulating-brass-pressure-relief-valve/
Is the pressure rating of your pipe incorrect
If your system does not have the correct pressure rated pipeline you need to consult us personally for further advice
http://localhost/irrinew/product/pressure-reducing-valve/
Are they freezing in cold climates?
A good method of protecting pipes from Freezing is to lag the pipes with refrigeration insulation.
This product can be supplied by us but for further information please email our friendly sales team on [email protected]
